Key Facts

Product introduction / description:

Perfect for fixing and mounting in humid spaces. Reliable and just right for indoors and outdoors. You don't need to be an expert. You don't need any special tools or equipment. You can say goodbye to dust from drilling and cleaning tools. You don't need to worry about whether the bond will stay. Anyone can use Pattex No More Nails  water resistant and get the job done with any material.

Product features:

  • Instant tack (10sec)
  • Water Resistant
  • Strong bonding power
  • Clean and Convenient

Application areas:

  • Wood  
  • Plaster
  • Concrete
  • Gypsum
  • Stone
  • polystyrene
  • Ceramic
  • PVC except PE, PP, PTFE
  • Cork

Tips and tricks:

The toothpick trick:

To avoid spreading glue around the surface when you glue it, try putting a toothpick into the glue strip and press firmly. The toothpick will keep the height you need and keeps the glue from spreading. Give it a go..

What's the difference?

Porous materials are materials that let liquids and/or gases pass through them – either partially or totally (e.g. wood, fiber glass, cork…).

Non-porous material, on the other hand, doesn’t let any liquids and gases get through (e.g. glass, metals, plastics).

Cleaning with cards

When you've finished gluing, take a playing card, fold it slightly and scrape it along the edges of the glued object and surface to scrape up any leftover glue. It's the best way to get away all of the residues! Quite easy, really.

How much do I need?

To get the perfect bond with the perfect strength, we recommend using between 200 to 400g of Pattex No More Clamping per square meter

Better control

If you're using a Pattex No More Nails Cartridge, a good idea is to cut the nozzle with a triangular forceps for a V-shaped edge to the nozzle. It makes it easier to control the flow of glue when you apply it.


  • Cartridge


Protect from frost and humidity

Step by step

1. Before applying the glue, make sure the gluing surface is clean, dry and free of grease and wallpaper.


2. If you use a No More Nails cartridge, open it with a cutter then fix the nozzle and cut it at the width needed. Then, place the cartridge in the pistol.


3. Depending on the size and shape of the object you want to glue, prefer applying stripes or drops. You just need to glue 1 of the 2 surfaces with No More Nails.


4. After mounting the object, if you are not satisfied of the positioning, you have still 10 minutes to make adjustments. And once the position of the object is right, press firmly to ensure a proper bond.


5. Use a wet sponge to easily wipe away any excess glue


6. Wait 24 hours (up to 48 hours for heavy objects) so that the bond reaches its final strength (at a temperature between -20°C and +80°C).